Step of artificial turf Dripping Springs Installation Process

Step of artificial turf Dripping Springs Installation Process

What is Synthetic Turf?


Synthetic turf looks exactly like natural grass. It can replace real grass as it includes low-maintenance costs and stays green throughout the year. People who love green lawns can think about installing artificial turf Dripping Springs if indeed they want an aesthetic lawn.


What is the Cost of Installation?


Artificial grass has a high installation cost, but it is undoubtedly a worthwhile investment as it doesn’t need any maintenance. Because it is merely a one-time investment, you should think of replacing your natural lawn with Waterloo Turf Co grass.


What Steps are Involved in the Installation Process?


By now, some of you might be wondering what steps to get excited about the artificial turf installation process? Recommendations your answer!


There are 8 steps mixed up in the installation process, and they are given below:


Excavation

Base Preparation

Lay Out Your Turf

Cutting Your Turf

Securing Your Turf

Infill Turf

Brush Infill

Time To Enjoy Your Turf!


Let’s look at these steps in greater detail to help you decide whether or not you should install artificial turf in your outdoor space.


Excavation


The place where you need your turf to be installed is cleaned by detaching debris and grass. Before your intended installation date, you'll need to spray a non-toxic weed killer to kill weeds and grassroots. Moreover, we dig the lawn to the average depth of 1-3 inches and level the bottom. We then will give you a trailer to grab all the debris and dirt from your lawn.


Base Preparation


Decomposed granite or gravel is utilized as the base material. 2-3 inches of this material is scattered evenly to improve drainage. We sprinkle some water over the base material and then use a plate compactor to level the whole surface and can add more base material if the top continues to be uneven.


Lay Out Your Turf


Before installation, we roll out your artificial turf in the sun to relax the blades and the backing. If multiple rolls are utilized, we make sure all the blades face the same direction to make it look real and natural.


When the base is ready for positioning your turf, make certain to avoid stepping onto it and steer clear of dragging any items over the freshly smoothed-out surface.


Next, we use a carpet kicker for stretching your Texas Custom Turf. This may remove wrinkles and reduce the synthetic turf’s expansion due to heat.


Cutting Your Turf


We trim your turf by using a cut or carpet knife, all done from the black backside of your turf, and leave an extra inch over the edges of the turf. Next, we make sure both turf pieces are lined up accordingly and double-check all blades have the same direction to then finally seam your turf pieces with staples under the turf where in fact the pieces meet.


Securing Your Turfs


How to fix your turf? We secure your Texas Turfgrass by hammering non-galvanized nails at around 6-8 inches intervals and over the corners of the seam. Also, don’t dig the nail too deeply in the bottom as it will certainly cause the turf to be pulled downwards, creating indentations on the fake grass.


Infill turf


You must be thinking: what is an infill? Infill is a substance used to fill or block spaces or a hole. Why is it important? The infill helps keep turf fibers in an upright position and increases the turf’s life span. Texas turfgrass contains at least 1.5 lbs of infill per square foot. Be sure to choose the infill you prefer best as there are many varieties. Here is a set of infill to help you choose:


Play sand

Durafill

Zeofill

Crumb rubber

Silica sand

T-cool infill

Whatever you choose, we will ensure that you ensure that the infill is constantly spread throughout the complete area with the utilization a drop spreader.


Brush Infill


After the addition of infill, we power brush your turf using power or stiff-bristled broom to force the infill into the turf’s base. It can help the blades stand upright and remove any excess dirt or debris, rendering it look new!


Tip: To keep it looking brand new, we recommend a ‘freshen up’ of power brooming your turf every 3-6 months.


Time to Enjoy your New Turf!


Your artificial turf lawn is ready to use just like you would use a natural grass lawn. Unlike natural grass, the fake grass will stay green all year long, regardless of any season. Enjoy your artificial lawn by inviting friends and family for an evening tea party and calm your mind by looking at the peaceful sights in the comfort of your residence.


How many days does the turf installation take?

On average, professional turf installers take 1-5 days to install the turf, depending on how large the spot is.


If you’re residing in Austin, TX, and want to hire professional turf installers, Waterloo Turf Co is the best option for you! It is one of the very most trusted artificial turf installation companies, formerly known as Waterloo Turf.


Good luck with your turf installation!

Published by dewob89495

Reply heres...

Login / Sign up for adding comments.