Garage car lifts are available in large numbers in retail chains. Perhaps all car owners think about installing a lift in the home garage. After all, it is quite convenient. Only it is necessary first of all to determine the type of lift because they are quite different, and the price is significantly different. And it is not always more profitable to make a car lift for the garage with your own hands than to buy one.

Choosing A Lift For The Garage

When choosing a lift, you should study their technical characteristics and their capabilities. The right choice will depend on the quality and efficiency of the maintenance work carried out. For help, you can directly contact the company, which is engaged in the supply of this equipment. They can navigate and choose the lift that will meet all the requirements.

Note: At the stage of designing a garage, it is better to do a garage project with a lift. Then you will be able to take into account the size of the lift and correctly determine the area of the room.

Making a lift for the garage with your own hands or buying pay attention:

  • DIY or purchased lift in the garage must match the dimensions of the room.
  • Residential car lifts for the garage, according to, should also be selected by the weight of the vehicle.
Note: On the first point, it is necessary to add space for free movement. And on the second, note that carrying capacity must be chosen in the direction of increasing the maximum permitted weight on 20% minimum.

Types of Car Lifts:

Single post lifts

These lifts are mainly available in mobile versions and are designed to facilitate the work of locksmiths in certain areas of the service point, and have the status of an additional lifting mechanism. The design of such lifts is such that they take up little space, which is very important since the useful area of the service station is saved.

Two-post lifts

Such lifts have the main technical parameters that you need to pay attention to the height to the crossbar, the gap between the columns, the lowest height of lowering the feets, the feets departure, as well as the safety mode and how they work. Two-post lifts are the main in technical service systems and allow you to perform all kinds of plumbing work. As a rule, lifts with a lifting capacity of no more than 4.5 tons are used for the maintenance of cars.

Four-post lifts

Such a garage lift is used for major repairs of cars, as well as work on the collapse-convergence.

  • These are universal lifts with a set of many functions that allow you to work with both cars and trucks.
  • They can be equipped with various devices that allow you to perform any type of repair work.
  • These lifts have one control panel and one motor. The synchronization of the columns is carried out with the help of cables that can adjust the level of the lifting of each rack individually, which makes it more versatile.

Scissor lifts

A scissor lift for a garage is used as a mobile lifting tool, which is very often used at the collapse-convergence alignment points.

  • Such lifts have a purely hydraulic drive.
  • Very often, it is used at the point of tire mounting, for lifting very heavy wheels, as well as in body shops, where access to the car from any position is necessary.
  • A scissor lift for a garage is preferred if you are working on body repair.

Plunger lifts

Such a lift in the garage has a very simple design and consists of legs mounted on plungers (hydraulic cylinders), which, as a rule, are embedded in the floor, which makes it possible to save working space.

  • They are one-, two -, with legs. With their help, it is possible to make repair and technical inspection of any type of vehicle, both cars and trucks.
  • They are highly reliable and durable and do not require maintenance, but at the same time, have a high cost, which does not allow their widespread use in the field of car maintenance.
  • As can be seen from the above in the market of lifting equipment and devices, you can find a lot of designs that can be used for repairs and maintenance of cars.

For cars with very low ground clearance, manufacturers produce special lifts with a low height of feet lowering. Such vehicles include sports cars and sports variants of cars with low clearance. Electromechanical garage lift requires daily inspection and control of the gap of the safety nut. When there is a gap, less than the required, the mechanism should be put on repair, with the replacement of worn parts. Lubrication of the main moving parts can be performed either manually (in cheaper models), or in automatic mode. Various types of vehicles are involved in daily human activities that require preventive inspections, maintenance, and different kinds of repairs. The range is so large that it requires a very wide range of lifting mechanisms: from lifting mechanisms for motorcycles, to lifting mechanisms of armored vehicles and cars with an extended base. Based on this, each type of lift is designed to lift certain types of transport. For passenger cars, the manufacturers produce certain types of lifts. For trucks, there are different types, especially since not every truck can be driven into the box and carry out repairs or technical inspection. There are specially designed lifts for large motor depots, which have large-capacity means for cargo transportation. It makes no sense to drive such vehicles every time in special boxes for inspection or minor repairs, especially since the presence of such boxes is an extra cost and useful space. Such cars are usually repaired in specialized workshops if serious repairs are required. When choosing a lift for the garage, you can stop at the electro-hydraulic version of the lift, as more reliable and convenient to use. The advantage of such a lift is that in the absence of electricity, it can be lowered manually. Moreover, this will be done very quickly, unlike with other types of lifts, where you have to twist the handle of the mechanism for about half an hour.

Published by James Howart