Are you planning to purchase ready-mix concrete from mini mix concrete suppliers? Well, this is when you need to be very careful because you might end up purchasing an incorrect mix design. In case you order a wrong one you might have to face many issues like delay in completion of the project, reduced revenue, etc. This mistake of yours can prove to be very costly. Hence, it is essential that you carefully make your purchase. To help you with the right purchase, here are some of the tips to help you out. 

Know Your Needs

Once you have found mini mix concrete suppliers, you need to convey your needs for the concrete. This information helps the suppliers to know what exactly you want. With this, they can offer you exactly what you want to gain the best results. 

You also need to talk to the supplier about the anticipated exposure that you want and the concrete service condition. Based on this, the supplier will offer material for the application. The supplier will also recommend you about the admixtures you can use for enhancing the performance of the concrete. 

Ordering The Correct Amount Of Concrete

For ordering the correct amount of concrete from mini mix concrete suppliers, you need to determine the nature of the project. Before ordering you need to take a few measurements. You need to measure the depth, width, and length of the area for which you want to use the concrete. 

Many websites offer online calculators to calculate the amount of concrete you require. Another thing that you can do is to get in touch with the local company and ask the executive to visit you. The executive can assist you in knowing the right amount of concrete needed for the project.

If you purchase too much of this concrete from mini mix concrete suppliers, then it would be wastage of material and money both. Also, buying less of concrete will delay your project. Hence, it is advisable that you order around 10% more quantity of what is calculated. 

Usage Of Admixture

At some project sites, an extra dosage of admixture is added to enhance the performance of concrete. In case the concrete you buy from the mini mix concrete suppliers already contains a lot of admixtures then this could lead you in a problem. 

There are a few admixtures that contain chlorides. In that case, it is important to know the level of chloride used. If the amount of chloride is high in the ready concrete, it can lead to corrosion. This has a negative impact on the durability of the building. Therefore, it is good to avoid buying concrete that contains admixtures.

Majority of the suppliers do not use admixtures that are chloride based. But, before purchasing it is good to be clear. 

Transportation Time

Deciding on transportation of the concrete requires proper coordination and planning with the mini mix concrete suppliers. Make sure that you give suppliers as much information as they want. Remember one thing if the supplier is far from your project site then you might have to incur high transportation cost. 

According to the set standards, these concretes must be used within 120 minutes of mixing. In case retarding admixture is utilized then the longer time might be permitted. However, make sure which retarder is used. Also, check if retarder is used as per the manufacturer guidelines. 

Make sure that you do not schedule the delivery of ready-mix concrete from mini mix concrete suppliers during traffic hours. 

These are some of the tips you need to remember at the time of placing an order with the supplier. 

Published by Christina Woodard