7 Ways to Get Rid Of Excess Engine Oil from Your Car

Excess Oil

7 Ways to Get Rid Of Excess Engine Oil from Your Car

Excess engine oil happens when there’s not enough room for the lubricant to flow. This can happen because of a leak or because of internal war, such as from bad seals or worn-out bearings. The more you drive, the more likely it is that your car will leak some amount of excess oil out onto the ground. It’s also possible for your vehicle to lose its entire supply if an overflow pipe breaks on either side where the crankcase meets the transmission housing.


How to Get Rid Of Excess Oil in a Car


Engine Oil


In order to get rid of excess engine oil, you should first identify why it's happening in your car and then find a solution that fixes this problem. There are 7 ways to remove excess engine oil from your car, as described below. Visit Seattle Streetcar website for detailed instructions on how to change your oil.


1. Change the engine oil and filter


One of the simplest ways to remove excess engine oil is to change the oil and filter. This gets rid of the old, dirty oil and replaces it with fresh oil. Be sure to use the type of oil recommended in your car’s manual and to dispose of the old oil safely.


2. Replace the gasket around your engine


Engine Oil


If you find your car is leaking oil, it may be because the gasket around your engine (not the gasket between the oil pan and the transmission) has worn out. When this happens, the oil can leak out and cause problems. A new gasket can fix this issue and stop the leaks.


3. Add a sealant to the engine oil


Adding a sealant to your engine oil can help reduce leaks and improve oil change intervals. As the name implies, the sealant will help to seal any leaks that may be present in your engine.


4. Add a stop leak additive to the engine oil


Stop leak additive is like a sealant; however, it helps by removing any particles that may cause the leaks. These particles often come from old gaskets or seals, so adding a stop leak additive help to get rid of them and fix the problem.


5. Use a vacuum system to suck up the excess oil


Engine Oil


A vacuum system lets you remove excess engine oil with a suction pump. One end of the suction hoses placed over the oil drain plug, and they attach the other end to a pump. The pump is then turned on, which creates a vacuum and removes the excess oil.


6. Get a tow truck to take your car for repairs


If none of these techniques work, you may need to take your car in for repairs. One option is to get a tow truck to take it to a mechanic. This is often the quickest and easiest way to get your car fixed.


7. Use a manual oil extractor


If you have a lot of excess engine oil and don’t want to wait for a tow truck, you can use a manual oil extractor instead. This tool is inserted into the engine and opens to release excess oil. Once it’s open inside the engine, the oil flows out through a tube that’s attached to a bucket or other container underneath. It can suck up large or small amounts of oil, making it a versatile tool to have on hand.


Summary


No matter what method you choose to get rid of excess engine oil, be sure to take safety precautions. Always use caution when working under your car and be sure to dispose of the old oil properly. And as always, consult your vehicle’s owner’s manual.

Published by Nicole Stokes

Reply heres...

Login / Sign up for adding comments.